The Road To A Rejuvenated Bathroom - Installing A New Shower Unit

Book Now

Just how do you actually feel about How to Install a Direct-to-Stud Shower Enclosure?

A successful shower setup calls for cautious preparation and also a lot of work. For the most part, you will certainly require to do 3 types of tasks: mounting wall surfaces, installing the plumbing, and also finishing walls.

Preparation

First of all, you must decide on the type of shower that you want to set up. It is very important to identify whether the chosen shower can coping with specific systems and can regulate a safe level of water with the central heating boiler. A lot of shower units nowadays are developed to be versatile to various water pressures (such as stored hot water as well as chilly keys).
It is likewise vital to think about the water stress and also the preparation of the piping and also drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower system can be connected to the bath tap based on your need, and the water temperature level can be changed through the taps. Push-on mixers are cheap and extremely easy to install. However, although the hose link is easy, it is easily removed. Furthermore, it is troublesome to change the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this sort of shower are integrated with a bathroom mixer tap, and the temperature can be adjusted through the bath taps. It is a very inexpensive choice and also no additional plumbing is involved. However, the bath/shower mixers additionally experience inconvenient temperature level control alternatives.

Handbook Mixer: The pipe as well as spray of a manual mixer shower unit belong of the wall surface device and also the cold and hot water materials are connected to a solitary shutoff The temperature level as well as pressure of the water are controlled through either one or a selection of handles (in a lot more costly showers). Although temperature control is much easier in hands-on mixer types, they are much more expensive than the formerly stated mixers. They likewise require additional plumbing of cold and hot water system pipes.

Thermostatic Mixer: The hose and also spray of this shower kind belong of the wall surface system and the cold and hot water materials are attached to a single valve below too. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. One of the largest benefits of a thermostatic mixer shower type consists of practical temperature control. Nevertheless, it is the most pricey of the different mixer alternatives.

Power Shower: A power shower is a solitary unit having a powerful electrical pump that can altering both the water stress as well as temperature level. This type of shower can be fitted if there is water from a cold water tank and a warm water cylinder. A power shower makes the change of both stress as well as temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is very important to note that for this shower kind to be installed, the mains pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature and also pressure to be changed via a handle. Models with temperature level stabilisers are much better as they remain untouched by various other taps somewhere else in operation within the home. A significant disadvantage of electrical showers is that the control knob just allows for the option of heats at much less pressure, or reduced temperatures at a higher stress. This is problematic in the winter when the spray is often weak as well as the keys water is colder. Nevertheless, this trouble is dealt with in some versions which are available with a winter/summer setting.

Technique

Relying on the type of shower you want to set up, the shower head must either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check shutoff.
Before starting, it is a good idea to note the placements of the shower head and control, as well as to intend the pipe-work involved. Furthermore, the drain system to get rid of the drainage will need to be prepared. Both settings of the wire route and the shower switch will certainly additionally need to be considered if an immediate or electric shower system is being set up.
Make use of the instruction guide provided with the shower device to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to remove the water supply. In order to protect the pipelines, they need to be provided a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can after that be hidden right into the wall surface and also smudged over to neaten the general look.
Fit the base tray, shower head, as well as installations.
Connect the main shower control to the pipes that will be supplying the water (This may need a female screw thread adapter).
Reconnect the supply of water as well as test the pipes for any type of leaks, as some may need tightening up.
If you are setting up an electrical shower, keep in mind to switch off the electricity supply before making any electrical links. As soon as these links have actually been made (there must be support within the user's manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a better elevation (occasionally just 150mm (6inches)) by installation a strong wooden assistance underneath it - potentially composed of struts and blockboards. If you pick this alternative, the primary as well as distribution pipes will certainly additionally need to be increased to meet the brand-new elevation of the tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached right into the power supply in order to operate.

Piping and Water drainage

It is best to make use of 15mm diameter supply pipelines, and also make the go to the shower as short and straight as possible so regarding maintain optimal stress as well as minimise heat loss. Additionally, by minimising making use of arm joints for pipe corners, you can decrease the resistance in the circulation of the water system. You can accomplish this by bending the pipes rather.

A Lot Of Typical Mistakes

Breaching or disregarding local code constraints.

Utilizing pipes that are too tiny.

Connecting copper to galvanized without using a brass or dielectric suitable between the two.

Not making use of tape or pipeline compound at threaded joints.

Uneven your fixtures when installing them.

Not installing an air void filling up for fixtures.

Cutting supply stub outs also brief to install the shutoff valves onto after the ended up wall is in place.

Not effectively straightening tubing into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leakage.).

When turning the water back on in your house, constantly run the outside tube valve or purge your bathrooms to bleed dust and air from the lines. This particles can trigger problems in your sink taps and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm certainly very excited about How to Install a Direct-to-Stud Shower Enclosure and I really hope you appreciated my article. Sharing is caring. One never knows, you will be doing someone a favor. Thank you so much for your time invested reading it.

Contact Us Now